Products
SR650
The ultra high-speed horizontal type rotary packaging machine for packing speed/of 400 to 1000 bags/min.
●Carefully selected standard functions to achieve low cost and space saving.
●Employs a cam switch for easy adjustment of each timing.
●It is OK to change the mark position only by changing the set value.
●Since the temperature control of the heater is PID control, stable sealing is guaranteed.
●The I notch device adopts a rotary blade type. You can easily adjust the blade alignment. (option)
Package shape
Filling
Packaging speed
Bag length
Bag width
Diameter of packaging film
Power source
Air consumption
Machine size dimension
Machine weight
Standard device
Safety unit(Interlocks)It is prohibited to run the packaging machine with the safet...
Control board: touch panelA touch panel for setting and operating the packaging machin...
Photocell pattern matching unitControl the film feeding by matching the film mark distance,...
Film joint detector unitDetects the joint tape of the film and performs the set alar...
Film End detector unitWhen the film on the packaging shaft ends, an alarm or machi...
Heater abnormal temperature detector unitWhen the temperature of the heat sealer deviates from the se...
Heater disconnect detection unitDetects the disconnection of the power line of the heat seal...
Air pressure malfunction detection unitWhen the pressure of compressed air supplied to the equipmen...
Product counter unitCounts and displays the number of bags packed by the packagi...
Packaging film braking unitBrake the film to prevent sagging of the film.
Packaging film pull-out roll(non-slip type)Rollers with high grip force feed the film properly.
Turn-table filling deviceWeigh the powder filling with a measuring cup and fill it in...
Chute knocker unitBy striking the filling chute at regular intervals, the stic...
HopperA container for storing fillings.
Product carry-out guideA slide that discharges the finished bag.
Control panels(display devices optional)Place a tick mark on each adjustment handle.
Warning light unitThe signal tower lights up or an alarm sounds in situations ...
Auto-splicerit deviceAt the end of the film, it automatically switches to the new...
Option
Film shortage warning unitAn alarm will be activated when the remaining film on the pa...
Remaining film indicator unitThe remaining amount of film on the packaging shaft is calcu...
Empty bag detection unitEmpty bags are detected and an alarm or machine stop operati...
Sealer unit for 4-side sealThis is the configuration of the sealer for 4-side seal pack...
Sealer unit for pair sealThis is the configuration of the sealer for pair bag packagi...
Seal cooling unitAir cools the film after it is sealed.
Biting detection unit for sealA sensor detects if the filling is caught in the sealed port...
I notch unitMake an opening notch on the bag.
Cutter unitCut each bag straight.
Perforation unitCut perforations in the set number of bags.
Packaging film roll guider unitWhen the film meanders, automatic correction is performed to...
Static electricity eliminator unitBy removing static electricity from the film, it prevents un...
System for handling large packaging filmBy making it possible to attach film with a large diameter u...
System for handling φ520mm packaging filmBy making it possible to attach film with a large diameter u...
Packaging material section coverCovering the film path prevents dust and dirt from entering ...
Packaging material section full coverCovering the entire film path prevents dust and dirt from en...
Variable volume type turn-table filling deviceWeigh the powder filling with a measuring cup and fill it in...
Auger filling deviceThe powder is pushed out with a screw and filled into the ba...
Feeder deviceVibration conveys powdered or solid fillers and fills them i...
Pico scaleThe weight of the powder filling or solid filling is weighed...
Teflon coated former pipeA Teflon coating is applied to the former pipe (filling chut...
Teflon coated intermediate chuteTeflon coating is applied to the middle filling chute to imp...
Contamination collection deviceIt collects the dust that has risen up near the filling devi...
Level sensor unitWhen the filling in the hopper is insufficient during the op...
Mesh filter in hopperA mesh filter is installed inside the hopper to prevent fore...
Packing conveyorThe bag is clipped and conveyed horizontally to the specifie...
Constant sorting unitThe bags packed by the packaging machine are distributed to ...
Preset number shutter unitAfter storing the set number of bags packed by the packaging...
Product carry-out conveyor – 600 mmThis is a conveyor that transports the bags packed in the pa...
Auto reject discharger unitWhen a defective product bag is detected, the target bag is ...
Hot roll printerIt is a printing type printer similar to hot printers, and f...
Thermal printerA printer that thermally transfers ink from a thermal ribbon...
Ink jet printerA printer that prints expiration dates and other information...
Stamping unitA type stamp is attached to the heat sealer, and the expirat...
Air blow gunAir blow gun for cleaning.
Calendar timerAutomatically turn on the power of the packaging machine on ...
Raising baseThe packaging machine is raised according to the line height...
Air compressor deviceSupply compressed air to the packaging machine.
Air dryer deviceBy separating and discharging the moisture contained in the ...
Usage
Contact
Please feel free to contact us for any questions or consultations regarding our products and technology.
Contact by phone
Working hours 9:00 - 17:00 [Excluding Saturdays, Sundays and public holidays]