Products
SR300
The ultra high-speed horizontal type rotary packaging machine for packing speed/of 300 to 500 bags/min.
●Carefully selected standard functions to achieve low cost and space saving.
●Employs a cam switch for easy adjustment of each timing.
●It is OK to change the mark position only by changing the set value.
●Since the temperature control of the heater is PID control, stable sealing is guaranteed.
●The I notch device adopts a rotary blade type. You can easily adjust the blade alignment. (option)
Package shape
Filling
Packaging speed
Bag length
Bag width
Diameter of packaging film
Power source
Air consumption
Machine size dimension
Machine weight
Standard device
Safety unit(Interlocks)It is prohibited to run the packaging machine with the safet... More
Control board: touch panelA touch panel for setting and operating the packaging machin... More
Photocell pattern matching unitControl the film feeding by matching the film mark distance,... More
Film joint detector unitDetects the joint tape of the film and performs the set alar... More
Film End detector unitWhen the film on the packaging shaft ends, an alarm or machi... More
Heater abnormal temperature detector unitWhen the temperature of the heat sealer deviates from the se... More
Heater disconnect detection unitDetects the disconnection of the power line of the heat seal... More
Air pressure malfunction detection unitWhen the pressure of compressed air supplied to the equipmen... More
Product counter unitCounts and displays the number of bags packed by the packagi... More
Packaging film braking unitBrake the film to prevent sagging of the film. More
Packaging film pull-out roll(non-slip type)Rollers with high grip force feed the film properly. More
Turn-table filling deviceWeigh the powder filling with a measuring cup and fill it in... More
Chute knocker unitBy striking the filling chute at regular intervals, the stic... More
HopperA container for storing fillings. More
Product carry-out guideA slide that discharges the finished bag. More
Control panels(display devices optional)Place a tick mark on each adjustment handle. More
Warning light unitThe signal tower lights up or an alarm sounds in situations ... More
Auto-splicerit deviceAt the end of the film, it automatically switches to the new... More
Option
Film shortage warning unitAn alarm will be activated when the remaining film on the pa... More
Remaining film indicator unitThe remaining amount of film on the packaging shaft is calcu... More
Empty bag detection unitEmpty bags are detected and an alarm or machine stop operati... More
Sealer unit for 4-side sealThis is the configuration of the sealer for 4-side seal pack... More
Sealer unit for pair sealThis is the configuration of the sealer for pair bag packagi... More
Seal cooling unitAir cools the film after it is sealed. More
Biting detection unit for sealA sensor detects if the filling is caught in the sealed port... More
I notch unitMake an opening notch on the bag. More
Cutter unitCut each bag straight. More
Perforation unitCut perforations in the set number of bags. More
Packaging film roll guider unitWhen the film meanders, automatic correction is performed to... More
Static electricity eliminator unitBy removing static electricity from the film, it prevents un... More
System for handling large packaging filmBy making it possible to attach film with a large diameter u... More
System for handling φ520mm packaging filmBy making it possible to attach film with a large diameter u... More
Packaging material section coverCovering the film path prevents dust and dirt from entering ... More
Packaging material section full coverCovering the entire film path prevents dust and dirt from en... More
Variable volume type turn-table filling deviceWeigh the powder filling with a measuring cup and fill it in... More
Auger filling deviceThe powder is pushed out with a screw and filled into the ba... More
Feeder deviceVibration conveys powdered or solid fillers and fills them i... More
Pico scaleThe weight of the powder filling or solid filling is weighed... More
Teflon coated former pipeA Teflon coating is applied to the former pipe (filling chut... More
Teflon coated intermediate chuteTeflon coating is applied to the middle filling chute to imp... More
Contamination collection deviceIt collects the dust that has risen up near the filling devi... More
Level sensor unitWhen the filling in the hopper is insufficient during the op... More
Mesh filter in hopperA mesh filter is installed inside the hopper to prevent fore... More
Packing conveyorThe bag is clipped and conveyed horizontally to the specifie... More
Constant sorting unitThe bags packed by the packaging machine are distributed to ... More
Preset number shutter unitAfter storing the set number of bags packed by the packaging... More
Product carry-out conveyor – 600 mmThis is a conveyor that transports the bags packed in the pa... More
Auto reject discharger unitWhen a defective product bag is detected, the target bag is ... More
Hot roll printerIt is a printing type printer similar to hot printers, and f... More
Thermal printerA printer that thermally transfers ink from a thermal ribbon... More
Ink jet printerA printer that prints expiration dates and other information... More
Stamping unitA type stamp is attached to the heat sealer, and the expirat... More
Air blow gunAir blow gun for cleaning. More
Calendar timerAutomatically turn on the power of the packaging machine on ... More
Raising baseThe packaging machine is raised according to the line height... More
Air compressor deviceSupply compressed air to the packaging machine. More
Air dryer deviceBy separating and discharging the moisture contained in the ... More
Usage
Contact
Please feel free to contact us for any questions or consultations regarding our products and technology.
Contact by phone
Working hours 9:00 - 17:00 [Excluding Saturdays, Sundays and public holidays]