Products
MR10
Simple model of liquid wrapping machine. For small lots, for multi -product. No air required with standard configuration.
●Low cost.
●It is space-saving and can be installed anywhere.
●Ideal for multi-product, small-lot production.
●Standard specifications do not require an air supply.
●Gap between rolls can be displayed. (option)
Package shape
Filling
Packaging speed
Packaging volume
Bag length
55 to 160mm(3div) / 70 to 120mm(2div)
Bag width
Film width 60 to 260mm
Diameter of packaging film
Power source
Machine size dimension
Machine weight
Standard device
Safety unit(Interlocks)It is prohibited to run the packaging machine with the safet... More
Control board: touch panelA touch panel for setting and operating the packaging machin... More
Photocell pattern matching unitControl the film feeding by matching the film mark distance,... More
Film joint detector unitDetects the joint tape of the film and performs the set alar... More
Film End detector unitWhen the film on the packaging shaft ends, an alarm or machi... More
Film shortage warning unitAn alarm will be activated when the remaining film on the pa... More
Remaining film indicator unitThe remaining amount of film on the packaging shaft is calcu... More
Heater abnormal temperature detector unitWhen the temperature of the heat sealer deviates from the se... More
Product counter unitCounts and displays the number of bags packed by the packagi... More
Sealer pressure manual screw control unitAdjust the pressing force of the heat seal roller by turning... More
Heater for second horizontal sealing rollA heater is built into the second horizontal seal roller. More
Air expelling roll unitThe air inside the bag is removed with a squeezing roller wh... More
I notch unitMake an opening notch on the bag. More
Cutter unitCut each bag straight. More
Packaging film braking unitBrake the film to prevent sagging of the film. More
Packaging film pull-out roll(non-slip type)Rollers with high grip force feed the film properly. More
Product carry-out guideA slide that discharges the finished bag. More
Option
Air pressure malfunction detection unitWhen the pressure of compressed air supplied to the equipmen... More
Gap display of sealerThe gap between the heat seal rollers is displayed on the to... More
Sealer unit for 4-side sealThis is the configuration of the sealer for 4-side seal pack... More
Sealer unit for pair sealThis is the configuration of the sealer for pair bag packagi... More
Pour spout sealing unit
Vertical sealing pre-heater unitShorten the vertical sealing time by preheating the film jus... More
Both sides notching unitMake opening notches on the left and right sides of the 4-si... More
Perforation unitCut perforations in the set number of bags. More
Vertical slitter unitSeparates multi-line bags into individual bags. More
Vertical perforation unitPerforations are applied between multiple lines of bags. More
Bag pulling unitBy pulling the bag after sealing, it assists the vertical sl... More
Packaging film shaft forward-backward moving device(operated by operation panel)The front and rear position of the packaging material axis c... More
Packaging material UV sterilizing unit(Effective up to 10 m/min)Sterilize the film by irradiating it with ultraviolet light.... More
Packaging film roll guider unitWhen the film meanders, automatic correction is performed to... More
Static electricity eliminator unitBy removing static electricity from the film, it prevents un... More
Packaging material section coverCovering the film path prevents dust and dirt from entering ... More
Packaging material section full coverCovering the entire film path prevents dust and dirt from en... More
Clean booth unitBy placing the fan filter unit on the packaging material sec... More
Cascade pumpIt is a vortex type pump, and the impeller rotates inside th... More
Rotary pumpThis is a pump that pumps liquid into the space of two pairs... More
Mohno pumpA high-precision eccentric screw type pump that can be fille... More
Forward/reverse mohno pumpMohno pump capable of intermittent liquid filling of one bag... More
High-speed intermittent pump(servo-type)Piston pump capable of intermittent liquid filling of one ba... More
Plunger pumpPlunger pump capable of intermittent liquid filling of one b... More
Agitator devicePropeller blades stir the filling in the hopper. It has the ... More
Push screw deviceA large bladed screw pushes the filling downwards in the hop... More
Auger filling deviceThe powder is pushed out with a screw and filled into the ba... More
Turn-table knocker unitBy hitting the filling chute at regular intervals, it preven... More
Chute vibrator unitBy applying fine vibration to the filling chute, it prevents... More
Chute knocker unitBy striking the filling chute at regular intervals, the stic... More
Teflon coated former pipeA Teflon coating is applied to the former pipe (filling chut... More
Teflon coated intermediate chuteTeflon coating is applied to the middle filling chute to imp... More
Contamination collection deviceIt collects the dust that has risen up near the filling devi... More
HopperA container for storing fillings. More
Level sensor unitWhen the filling in the hopper is insufficient during the op... More
Turn-table filling device(for pair packaging)A liquid packing machine fills one side of the pair bag with... More
Constant sorting unitThe bags packed by the packaging machine are distributed to ... More
Preset number shutter unitAfter storing the set number of bags packed by the packaging... More
Product carry-out conveyor – 600 mmThis is a conveyor that transports the bags packed in the pa... More
Auto reject discharger unitWhen a defective product bag is detected, the target bag is ... More
Hot roll printerIt is a printing type printer similar to hot printers, and f... More
Thermal printerA printer that thermally transfers ink from a thermal ribbon... More
Ink jet printerA printer that prints expiration dates and other information... More
Stamping unitA type stamp is attached to the heat sealer, and the expirat... More
Air blow gunAir blow gun for cleaning. More
Control panels(display devices optional)Place a tick mark on each adjustment handle. More
Calendar timerAutomatically turn on the power of the packaging machine on ... More
Warning light unitThe signal tower lights up or an alarm sounds in situations ... More
SS3 unitThis is a device that uses an ultrasonic horn just before th... More
Auto-splicerit deviceAt the end of the film, it automatically switches to the new... More
Raising baseThe packaging machine is raised according to the line height... More
Air compressor deviceSupply compressed air to the packaging machine. More
Air dryer deviceBy separating and discharging the moisture contained in the ... More
Usage
Contact
Please feel free to contact us for any questions or consultations regarding our products and technology.
Contact by phone
Working hours 9:00 - 17:00 [Excluding Saturdays, Sundays and public holidays]