Products
FC80
Small model of stick packaging machine.
●Compact model for small lots.
●Size suitable for 1-line and 2-line products.
●Can be connected to an auger filling device, weighing machine, or mass weighing machine.
Package shape
Filling
Packaging speed
Bag length
Bag width
Diameter of packaging film
Power source
Air consumption
Machine size dimension
Machine weight
Standard device
Safety unit(Interlocks)It is prohibited to run the packaging machine with the safet...
Photocell pattern matching unitControl the film feeding by matching the film mark distance,...
Film joint detector unitDetects the joint tape of the film and performs the set alar...
Film End detector unitWhen the film on the packaging shaft ends, an alarm or machi...
Heater abnormal temperature detector unitWhen the temperature of the heat sealer deviates from the se...
Air pressure malfunction detection unitWhen the pressure of compressed air supplied to the equipmen...
Product counter unitCounts and displays the number of bags packed by the packagi...
Push-type vertical sealer unitIt is configured to be a lap seal type pillow bag.
Cutter unitCut each bag straight.
Packaging film braking unitBrake the film to prevent sagging of the film.
Turn-table filling deviceWeigh the powder filling with a measuring cup and fill it in...
HopperA container for storing fillings.
Product carry-out guideA slide that discharges the finished bag.
Air blow gunAir blow gun for cleaning.
Option
Flexible handle for adjusting the position of the photocell pattern alignment unitAdjust the position of the photocell pattern alignment unit ...
Film shortage warning unitAn alarm will be activated when the remaining film on the pa...
Heater disconnect detection unitDetects the disconnection of the power line of the heat seal...
Empty bag detection unitEmpty bags are detected and an alarm or machine stop operati...
Pour spout sealing unit
Grip-type vertical sealer unitIt is configured to be a fin seal type pillow bag.
Seal cooling unitAir cools the film after it is sealed.
Biting detection unit for sealA sensor detects if the filling is caught in the sealed port...
I notch unitMake an opening notch on the bag.
Perforation unitCut perforations in the set number of bags.
Static electricity eliminator unitBy removing static electricity from the film, it prevents un...
Packaging material section coverCovering the film path prevents dust and dirt from entering ...
Packaging material section full coverCovering the entire film path prevents dust and dirt from en...
Variable volume type turn-table filling deviceWeigh the powder filling with a measuring cup and fill it in...
Slide mass weighing and filling deviceWeigh the powder filling with a measuring cup and fill it in...
Auger filling deviceThe powder is pushed out with a screw and filled into the ba...
Feeder deviceVibration conveys powdered or solid fillers and fills them i...
Pico scaleThe weight of the powder filling or solid filling is weighed...
Turn-table knocker unitBy hitting the filling chute at regular intervals, it preven...
Chute vibrator unitBy applying fine vibration to the filling chute, it prevents...
Teflon coated former pipeA Teflon coating is applied to the former pipe (filling chut...
Teflon coated intermediate chuteTeflon coating is applied to the middle filling chute to imp...
Contamination collection deviceIt collects the dust that has risen up near the filling devi...
Level sensor unitWhen the filling in the hopper is insufficient during the op...
Mesh filter in hopperA mesh filter is installed inside the hopper to prevent fore...
Nitrogen gas flashing unitThe bag is filled with nitrogen gas together with the fillin...
Timing shutter unutMultiple lines of bags packed by the packaging machine are d...
Preset number shutter unit for multi lineA set number of bags packed by the packaging machine are sto...
Product carry-out conveyor – 600 mmThis is a conveyor that transports the bags packed in the pa...
Auto reject discharger unitWhen a defective product bag is detected, the target bag is ...
Hot printerA printer that prints expiration dates and other information...
Hot roll printerIt is a printing type printer similar to hot printers, and f...
Thermal printerA printer that thermally transfers ink from a thermal ribbon...
Ink jet printerA printer that prints expiration dates and other information...
Stamping unitA type stamp is attached to the heat sealer, and the expirat...
Film edge cutting unitCut off the edges of the film to shape the bag.
Film edge eject unit(by air blow)In order to adjust the shape of the bag, the ends of the cut...
Film edge eject unit(by motor)A motor-driven roller pulls out and ejects the cut ends of t...
Control panels(display devices optional)Place a tick mark on each adjustment handle.
Calendar timerAutomatically turn on the power of the packaging machine on ...
Warning light unitThe signal tower lights up or an alarm sounds in situations ...
Raising baseThe packaging machine is raised according to the line height...
Air compressor deviceSupply compressed air to the packaging machine.
Air dryer deviceBy separating and discharging the moisture contained in the ...
Intermediate shutter unitA shutter that temporarily receives the number of small bags...
Small bags input conveyorThis is a conveyor that feeds small bags from the top of the...
Punching unit (air hole)This is a device that makes air vent holes in the outer bag ...
Usage
Contact
Please feel free to contact us for any questions or consultations regarding our products and technology.
Contact by phone
Working hours 9:00 - 17:00 [Excluding Saturdays, Sundays and public holidays]