Products
FC1000αLP
Bestseller of the world of stick packaging machines. Compatible with liquid stick bags.
●Since the filling nozzle rises/falls in sync with the horizontal seal, it can handle raw materials of all viscosities.
●Digital management of filling nozzle ascending/descending speed, upper/lower stop position, timing, etc.
●Our unique nozzle shape prevents the tip from getting dirty.
Package shape
Filling
Packaging speed
Bag length
Bag width
Diameter of packaging film
Power source
Air consumption
Machine size dimension
Machine weight
Standard device
Safety unit(Interlocks)It is prohibited to run the packaging machine with the safet...
Control board: touch panelA touch panel for setting and operating the packaging machin...
Photocell pattern matching unitControl the film feeding by matching the film mark distance,...
Flexible handle for adjusting the position of the photocell pattern alignment unitAdjust the position of the photocell pattern alignment unit ...
Film joint detector unitDetects the joint tape of the film and performs the set alar...
Film End detector unitWhen the film on the packaging shaft ends, an alarm or machi...
Film shortage warning unitAn alarm will be activated when the remaining film on the pa...
Heater abnormal temperature detector unitWhen the temperature of the heat sealer deviates from the se...
Air pressure malfunction detection unitWhen the pressure of compressed air supplied to the equipmen...
Product counter unitCounts and displays the number of bags packed by the packagi...
Push-type vertical sealer unitIt is configured to be a lap seal type pillow bag.
Vertical sealer automatic opening unitUnintentional melting of the film is prevented by automatica...
Cutter unitCut each bag straight.
Packaging film braking unitBrake the film to prevent sagging of the film.
Packaging film pull-out roll(motor type)A function that feeds out the packaging material with a moto...
Packaging film shaft left-right moving device(motor type)The left and right position of the packaging material axis c...
Packaging material section coverCovering the film path prevents dust and dirt from entering ...
Packaging material section full coverCovering the entire film path prevents dust and dirt from en...
HopperA container for storing fillings.
Product carry-out guideA slide that discharges the finished bag.
Auto reject discharger unitWhen a defective product bag is detected, the target bag is ...
Air blow gunAir blow gun for cleaning.
Film edge cutting unitCut off the edges of the film to shape the bag.
Film edge eject unit(by air blow)In order to adjust the shape of the bag, the ends of the cut...
Option
Remaining film indicator unitThe remaining amount of film on the packaging shaft is calcu...
Heater disconnect detection unitDetects the disconnection of the power line of the heat seal...
Empty bag detection unitEmpty bags are detected and an alarm or machine stop operati...
Pour spout sealing unit
Grip-type vertical sealer unitIt is configured to be a fin seal type pillow bag.
Seal cooling unitAir cools the film after it is sealed.
Biting detection unit for sealA sensor detects if the filling is caught in the sealed port...
I notch unitMake an opening notch on the bag.
Perforation unitCut perforations in the set number of bags.
Packaging material UV sterilizing unit(Effective up to 10 m/min)Sterilize the film by irradiating it with ultraviolet light....
Packaging film roll guider unitWhen the film meanders, automatic correction is performed to...
Static electricity eliminator unitBy removing static electricity from the film, it prevents un...
System for handling large packaging filmBy making it possible to attach film with a large diameter u...
System for handling φ520mm packaging filmBy making it possible to attach film with a large diameter u...
Clean booth unitBy placing the fan filter unit on the packaging material sec...
Cascade pumpIt is a vortex type pump, and the impeller rotates inside th...
Rotary pumpThis is a pump that pumps liquid into the space of two pairs...
Mohno pumpA high-precision eccentric screw type pump that can be fille...
Forward/reverse mohno pumpMohno pump capable of intermittent liquid filling of one bag...
High-speed intermittent pump(servo-type)Piston pump capable of intermittent liquid filling of one ba...
Plunger pumpPlunger pump capable of intermittent liquid filling of one b...
Agitator devicePropeller blades stir the filling in the hopper. It has the ...
Push screw deviceA large bladed screw pushes the filling downwards in the hop...
Nozzle cooling unitAir cooling of the filling nozzle prevents the film from the...
Nitrogen gas flashing unitThe bag is filled with nitrogen gas together with the fillin...
Timing shutter unutMultiple lines of bags packed by the packaging machine are d...
Preset number shutter unit for multi lineA set number of bags packed by the packaging machine are sto...
Product carry-out conveyor – 600 mmThis is a conveyor that transports the bags packed in the pa...
Hot printerA printer that prints expiration dates and other information...
Hot roll printerIt is a printing type printer similar to hot printers, and f...
Thermal printerA printer that thermally transfers ink from a thermal ribbon...
Ink jet printerA printer that prints expiration dates and other information...
Stamping unitA type stamp is attached to the heat sealer, and the expirat...
Film edge eject unit(by motor)A motor-driven roller pulls out and ejects the cut ends of t...
Control panels(display devices optional)Place a tick mark on each adjustment handle.
Calendar timerAutomatically turn on the power of the packaging machine on ...
Warning light unitThe signal tower lights up or an alarm sounds in situations ...
Auto-splicerit deviceAt the end of the film, it automatically switches to the new...
Raising baseThe packaging machine is raised according to the line height...
Air compressor deviceSupply compressed air to the packaging machine.
Air dryer deviceBy separating and discharging the moisture contained in the ...
Intermediate shutter unitA shutter that temporarily receives the number of small bags...
Small bags input conveyorThis is a conveyor that feeds small bags from the top of the...
Punching unit (air hole)This is a device that makes air vent holes in the outer bag ...
Usage
Contact
Please feel free to contact us for any questions or consultations regarding our products and technology.
Contact by phone
Working hours 9:00 - 17:00 [Excluding Saturdays, Sundays and public holidays]