Products
FC1000αAF
Bestseller of the world of stick packaging machines. Equipped with the industry's first multiple auger filling device.
It is now possible to pack fine powders and powders with poor fluidity that were previously impossible to pack.
●Beautiful and strong packaging
・Because it is filled near the sealing part, there is no powder floating up and there is almost no biting into the sealing part.
・One-touch change of filling amount
・You can change the weight for each column on the touch panel even during filling.
・Feedback control is also possible by interlocking with the weight checker.
●Hygienic
・It is hygienic because the material from the auger hopper to the inside of the bag is hardly exposed to the outside air.
・It does not pollute the working environment because it generates almost no dust even with fine powder.
Package shape
Filling
Packaging speed
Bag length
Bag width
Diameter of packaging film
Power source
Air consumption
Machine size dimension
Machine weight
Standard device
Safety unit(Interlocks)It is prohibited to run the packaging machine with the safet...
Control board: touch panelA touch panel for setting and operating the packaging machin...
Photocell pattern matching unitControl the film feeding by matching the film mark distance,...
Flexible handle for adjusting the position of the photocell pattern alignment unitAdjust the position of the photocell pattern alignment unit ...
Film joint detector unitDetects the joint tape of the film and performs the set alar...
Film End detector unitWhen the film on the packaging shaft ends, an alarm or machi...
Film shortage warning unitAn alarm will be activated when the remaining film on the pa...
Heater abnormal temperature detector unitWhen the temperature of the heat sealer deviates from the se...
Air pressure malfunction detection unitWhen the pressure of compressed air supplied to the equipmen...
Product counter unitCounts and displays the number of bags packed by the packagi...
Push-type vertical sealer unitIt is configured to be a lap seal type pillow bag.
Vertical sealer automatic opening unitUnintentional melting of the film is prevented by automatica...
Cutter unitCut each bag straight.
Packaging film braking unitBrake the film to prevent sagging of the film.
Packaging film pull-out roll(motor type)A function that feeds out the packaging material with a moto...
Packaging film shaft left-right moving device(motor type)The left and right position of the packaging material axis c...
Packaging material section coverCovering the film path prevents dust and dirt from entering ...
Packaging material section full coverCovering the entire film path prevents dust and dirt from en...
Auger filling deviceThe powder is pushed out with a screw and filled into the ba...
HopperA container for storing fillings.
Product carry-out guideA slide that discharges the finished bag.
Auto reject discharger unitWhen a defective product bag is detected, the target bag is ...
Air blow gunAir blow gun for cleaning.
Film edge cutting unitCut off the edges of the film to shape the bag.
Film edge eject unit(by air blow)In order to adjust the shape of the bag, the ends of the cut...
Option
Remaining film indicator unitThe remaining amount of film on the packaging shaft is calcu...
Heater disconnect detection unitDetects the disconnection of the power line of the heat seal...
Empty bag detection unitEmpty bags are detected and an alarm or machine stop operati...
Pour spout sealing unit
Grip-type vertical sealer unitIt is configured to be a fin seal type pillow bag.
Seal cooling unitAir cools the film after it is sealed.
Biting detection unit for sealA sensor detects if the filling is caught in the sealed port...
I notch unitMake an opening notch on the bag.
Perforation unitCut perforations in the set number of bags.
Packaging film roll guider unitWhen the film meanders, automatic correction is performed to...
Static electricity eliminator unitBy removing static electricity from the film, it prevents un...
System for handling large packaging filmBy making it possible to attach film with a large diameter u...
System for handling φ520mm packaging filmBy making it possible to attach film with a large diameter u...
Chute vibrator unitBy applying fine vibration to the filling chute, it prevents...
Teflon coated former pipeA Teflon coating is applied to the former pipe (filling chut...
Teflon coated intermediate chuteTeflon coating is applied to the middle filling chute to imp...
Contamination collection deviceIt collects the dust that has risen up near the filling devi...
Level sensor unitWhen the filling in the hopper is insufficient during the op...
Nitrogen gas flashing unitThe bag is filled with nitrogen gas together with the fillin...
Timing shutter unutMultiple lines of bags packed by the packaging machine are d...
Preset number shutter unit for multi lineA set number of bags packed by the packaging machine are sto...
Product carry-out conveyor – 600 mmThis is a conveyor that transports the bags packed in the pa...
Hot printerA printer that prints expiration dates and other information...
Hot roll printerIt is a printing type printer similar to hot printers, and f...
Thermal printerA printer that thermally transfers ink from a thermal ribbon...
Ink jet printerA printer that prints expiration dates and other information...
Stamping unitA type stamp is attached to the heat sealer, and the expirat...
Film edge eject unit(by motor)A motor-driven roller pulls out and ejects the cut ends of t...
Control panels(display devices optional)Place a tick mark on each adjustment handle.
Calendar timerAutomatically turn on the power of the packaging machine on ...
Warning light unitThe signal tower lights up or an alarm sounds in situations ...
Auto-splicerit deviceAt the end of the film, it automatically switches to the new...
Raising baseThe packaging machine is raised according to the line height...
Air compressor deviceSupply compressed air to the packaging machine.
Air dryer deviceBy separating and discharging the moisture contained in the ...
Intermediate shutter unitA shutter that temporarily receives the number of small bags...
Small bags input conveyorThis is a conveyor that feeds small bags from the top of the...
Punching unit (air hole)This is a device that makes air vent holes in the outer bag ...
Usage
Contact
Please feel free to contact us for any questions or consultations regarding our products and technology.
Contact by phone
Working hours 9:00 - 17:00 [Excluding Saturdays, Sundays and public holidays]