 |
|
|
 |
Stick
packaging
machine |
|
|
Standard
machine for stick packs.Best selling machine in
the world. |
|
Standard
devices
- Heater temperature
monitor
- Film end stop
device
- Abnormal air pressure
stop device
- Total counter
- Preset counter
- Pattern matching
devise
- Film joint
detector
- Detective removal
devise
- Edge slit removing
device
- Horizontal sealing
position changing devise of dial type
(used
for matching the pattern)
|
|
|
Mounted
with multi-line auger filler for the first time
in the industry. |
|
Stick-type
multi-auger filling packging machine is the
first machine in the packaging machine
industry.
- By virtue of the auger
filling device,packaging of fine powder and
powder of low fluidity,which was impossidle
until this machine is placed on the market,is
possible.
Beautiful and strong
packaging
- Since powder is filled
near the sealing part,on powder is blown up and
therefore no powder remain in the sealing
part.
Easy to change the
filling volume.
- The filling volume can
be changed by the touch panel during filling
operation.Feedback control is pssible by
interlocked operation with the weight
checker.
Sanitary
operation
- The powder is not
exposed to the atmosphere during flow from the
auger hopper into the bag. So,the operation is
sanitary.Since the packaging is carried out
under airtight condition,the ratio of
replacement with netrogen is high.
Clean environment
and operator-friendly machine
- Since no dust is
generated even when fine powder is being
filled,the environment is not
contaminated.
Easy setup change
for different bag size
- The setup can be
changed with ease for change of the bag length
by the touch panel.For change of the bag
width,the machine is with ease by the special
method peculiar to Sanko.
|
|
|
Simple and
compact version of FC series
machine. |
|
Standard
devices
- Temperature
monitor
- Film end stop
devise
- Abnormal air pressure
stop device
- Patten matching
device
- Eddge trimmer air
gun
- Total counter
- Preset counter
- Horizontal seal air
expelling roller
- Cutter guide
- Slider
|
|
|
Designed
for packaging all kinds of viscous
products. |
|
Automatic stick-type
filling and packaging machinse for
liquid
- Since the filling
nozzle moves up or down in synchronization with
the horizontal sealing device,this machine can
be used for liquids of any viscosity.(Patent
No.3347996)
- The moving up and down
speeds,upper and lower stop positions,and timing
of the filling nozzle can be controlled
digitally.
- Since the distanse
from the pump to the horizontal sealing device
has been reduced by installing the pump on the
top of the machine,contamination of the sealed
surfaces with the liquid has been
reduced.
- The use of a nozzle of
a special shape peculiar to Sanko's machines
prevents contamination of the nozzle tip,making
filling nitrogen possidle.
- By virtue of use of
bag making rolls peculiar to Sanko's
machine,changing the material to be filled and
subsequent adjustment are easy.
- Owing to the bag
length changing system develoed by Sanko. to
change the bag length is easy.
|
|
|
Simple
settings and changes through touch panel
(for package length, mark control,
etc.) |
|
The FC80 Serise
satisfies customers'various requirements and,as
a result,it has following
features.
- Setting and changing
bag length are very simple and easy.They are
performed only by pressing the touch panel with
your finger.
- The operation of the
box motion can be set to the optimum conditions
for the material to be charged,because up and
down movement of the horizontal sealing device
is driven by the servo-motor.The material data
can be stored and registered in the
memory.(Patented)
- The data of charging
timing, the position of pattern matching,and
defective products discharging timing for
various packaging can be stored in the
memory.
- lt is possidle to
connect an auger filler,quantity measuring
device,mass measuring device,and so on to this
machine.
(Patent No.3338377)
- The cut position of
the products can be chenged with ease by use of
the dial.
|
|
 | |
|
