• "High-speed mark follow processing" is achieved in the control part. 
• Following performance UP was able to be accomplished.
  ・Frequency to which the mark when a high-speed machine driving is done shifts decreases very much.
  ・The mark is corresponding immediately after the film roll exchange.
  ・The size change of the bag became possible without changing the composition of the heat seal roll in the large range.
  ・It became possible to produce special bags that the mark pitch is different in every one bag.
  ・It is a composition that can endure long-term operation because it forms the main body of the machine with integral parts of high accuracy and the rigidity.
• The heat seal roll and many kinds the option can be increased up to five in total.
  It became possible for the width of the menu key to extend by this, and to answer more needs.
  
  Ex)Composition for bag with difficult seal such as retort pouches.
  　　Vertical seal → Notch  →3 step Horizontal seal

• Space saving model.
• Air becomes unnecessary for the standardized configuration.
  ( However, air might become necessary according to the option.)
• Increased operability by adopting a 9.5" single color display.
• Little or no gap in registration mark control by having non-slip rollers feed the packaging material. (Result measured by Sanko +/-1mm)
• Reliable seals even for packaging oil, vinegar and other foamy products by embedding heaters in the secondary horizontal seal rollers.
• Possible to register products by names of products.
  

• Package length from 30mm up to 300mm. (Patent applied)
  Package length can be changed simply by changing seal bars, without changing seal rollers themselves.
• Shape and width of the horizontal seal, including intricate seal patterns, can be changed simply by changing horizontal seal rollers without removing bearings at both ends. (Option)
• Packaging speed: 30 ~ 600 packages per minute
• Features of ZERO-1 were developed further in this model. (Contact Sales Department for detail.)
  

• Cutting device is removable by "one-touch", the same type equipped with ZERO-1.
• Appropriate sealing pressure can be registered by means of numerical data for each product.
• Shape and width of the horizontal seal, including intricate seal patterns, can be changed simply by changing horizontal seal rollers without removing bearings at both ends. (Option)
• Volume to be filled can be registered by setting the number of revolutions of the pump. (Patent granted)

• This machine is used only for 4-side sealing of mayonnaise,shampoo,etc.
• Packaging film is pulled out using non-slip roll,and so mismatch of marking is very little.(Only +/-1mm according to actual measurement by this company.)
• A heater is built in the second horizontal sealing roll,therefore material that is prone to generate bubbles such as oil and vinegar can be sealed in steadily.

• This machine is for making tandem packs, containing liquid and powder, or paste and powder side by side.
  
• Increased operability by adopting a 9.5" single color display.
  
• Little or no gap in registration mark control by having non-slip rollers feed the packaging material. (Result measured by Sanko +/-1mm)
  
• Reliable seals even for packaging oil, vinegar and other foamy products by embedding heaters in the secondary horizontal seal rollers.
  
• Unlike conventional models, a stepping motor is used for driving the turntable feeder to feed product at exact timing according to the data set on the control unit.

>>More